Bill of Materials - Digi-Key Order Form

MegaSquirt Expansion Board

This is the MegaSquirt Expansion Board ordering form for Digi-Key. It will allow you to assemble Marc Piccioni's MegaSquirt Expansion Board with just a printed circuit board (PCB).

Change any quantities to the numbers you want, and click the button to send your order to Digi-Key. If the default quantities are used, the price for the 'Expansion Board parts' should be $64.54, as of September 2006.

Quantities are as required for MegaSquirt Expansion Board.


To order complete the following steps:

  1. Verify that you have the quantities you want for each item below.

  2. Then send your order to Digi-Key:

    You will be redirected to Digi-Key to confirm your order items and quantities.(Go to Ordering Homepage and "CREATE NEW ORDER" if you want to start over with an order after you have submitted it.)

  3. Finalize your order by clicking on the 'finish order' button on the Digi-Key site. Verify your order, payment method, and shipping details. The order will not be complete until you have finished this step.

Qty.
Expansion Board
Reference
Description
Digi-Key P/N
Unit
Price
Ext.
Price
per kit
(4)Capacitor 1uF 100V CER SMC 12100.5845.84
(2)Socket, 40-pin4.644.64
(7)Capacitor 0.1uF 08050.1761.76
(4)Diode BZT52C6V8-7DICT0.1641.64
(4)Diode BZT52C2V4-7DICT DO213AA0.1641.64
Optoisolator 6 pin dip0.321.28
Socket hc908 20x2 40 pin 3.253.25
Header pass through 20x2 tall 2x20 5.825.82
Header CON8 RA 1x8 1.801.80
Header CON8 RA 1x102.012.01
Header CON8 2 pin2.292.29
Transistor SSTA06T116CT0.362.52
(4)Resistor 240 Ohm 1/8W 08050.0760.76
(7)Resistor 470 Ohm 08050.141.40
(7)Resistor 220 Ohm 08050.141.40
(7)Resistor 10 Ohm 08050.0760.76
Header CON8 RA 1x10 (mates to J13)0.620.62
Header CON8 RA 1x10 (mates to J12)0.510.51
(2)Connector Socket 20-24AWG Tin CRIMP0.1713.42
(2)MAX232/SOIC0.900.90
(2)2.5mm stereo plug cable5.045.04
(2)DB9 Connector2.152.15
(2)DB9 Connector hood0.930.93
Sub-
total
Shipping and processing may be extra, depending on your location and order size$64.54
Here are the other parts you'll need to build your Expansion Board:Some MegaSquirt Related Links:
  1. 24 - 26 ga. solid wire jumpers
  2. J22 PHONEJACK STEREO MOUSER 161-2502

MegaSquirt Site

MegaSquirt Forums

MegaSquirt FAQ

NOTES:


If you have a question, comment, or suggestion for this page, e-mail the editor.

©2005 Marc Piccioni. All rights reserved.